Wifi LED Dimmer

Product Detail

HX-WIFI-V01
WIFI-LED Controller Specification
WIFI-V01 controller appeared with the installation of controlling software on mobile devices with Android or IOS system, such as android phone, Iphone, tablet PCs, they can remote control LED lighting products through Wi-Fi, which makes LED control more intelligent and humanization. One WIFI-V01 controller can be used as dimmer, CT controller, and RGB controller, only need to select the right control interface in the software. In addition, this model has DIY function. Users can get any effect they want based on our controlling software. If you don't have any mobile devices with the controlling software at hand, you could also use our RF remote control to control it. This model designed for constant voltage led products, such as led strip, led modules. For controlling more led products, amplifier is available.



Product Feature

?Support both Wi-Fi control of Apple products (iPod, iPad, Iphone), Android mobile devices like Samsung, HTC, and RF wireless remote control.
?With the 3-in-1(Dimming, CT, RGB) apple/android software. One device suit to different lighting application scene.
?Memory function to save scenes anytime anywhere for next play.
?WIFI-V01 is designed for constant voltage led products, working voltage auto fit to DC12-24V.
?Wi-Fi control based on 2.4GHZ frequency, RF remote control based on 433.92MHz.
?2 year warranty.

Technical parameters

1.Controller

Working temperature	-20-60?	Working voltage	DC12~24V
Power consumption	<3W	Connect method	Common anode
WIFI brightness level	100	WIFI speed level	100
Remote control brightness level	32	Remote control speed level	100
N.W.	150g	G.W.	230g
Case dimension	L108*W63*H28mm	Box dimension	L109*W55*H56mm
Output	3 channels	Output current	=4A(each channel)
WIFI frequency	2.4G	RF remote control frequency	433.92Mhz
Output gray scale	256	Memory function	support
Receiving sensitivity	802.11b:DSSS(-5dBm)802.11b:CCK(-10dBm)802.11g:OFDM(-15dBm)
Output power	12V: =144W(3CH) 24V: =288W(3CH)

2.RF remote control

Working temperature	-20-60?	Power supply	AAA*3
Standby current	7uA	Working voltage	1.5V*3
Working current	10mA	Remote control distance	Up to 30m
RF frequency	433.92Mhz	Power consumption	0.04mW

3.Software

Name	FreeColor V1.0	Platform	Android 2.1 or above, IOS4.3 or above, with the wifi function
Size	Android(661KB) , IOS(Being certified in)
Category	Communication	Language	English

Connector illustration



Using illustration
1. FreeColor V1.0 software installation and SSID (system settings ID) reset.
1.1Software installation
?Android: the software copy in CD which packed in the box. Open the CD and double-click the "Freecolor.apk" to start the installation.
?IOS : the same as the other software from App Store download the "Freecolor" from App store and install.

1.2 Resetting SSID

If more than one WIFI-V01 in close area, we can reset the SSID for the devices in order to avoid they jamming each other. The SSID are 16 in max.
The default SSID number for all devices is HX001, a device with WIFI function will be needed when
resetting the SSID. The SSID rang is: HX000-HX016. The steps are as follow:

?Making the WIFI-V01 properly connected, and then open the power;
?Opening the WIFI device browser, type in "192.168.2.2", the interface will pop into as below:



The initial default Username: admin, password: admin. And "Login".

?Resetting the SSID in the page as below:



?If necessary, setting the linking password for more security.

A.Select the "Security Mode": WEP64.



B.Type 10 hexadecimal ASCII codes into "Key Index 0", which corresponding five characters, and it will be the linking password. The common hexadecimal ASCII code as below:



For instance:

Password	ASCII code
88888	3838383838
12345	3132333435
abcde	4142434445

After setting, click "Apply" to finish.

?If necessary, setting new "Username" and password in the page as below:



After setting, click "Apply" to finish.

2.FreeColor V1.0 software operating illustration

1)Making the WIFI-V01 and LED products in correct connection, and then turn on the power supply;
2)After step 1), open the WIFI setting interface on the device with WIFI function will find the WIFI which named "HX---", connect it.
3) Open the "FreeColor" and start operation. There also have "WIFI Connection Setting" page in the software.
4) "FreeColor" is 3-in-1 (Dimmer, CT, RGB) software, the RGB scene is the default application interface. Enter the "System Setting" page to change the selection. The interface as below:

Click go to "System Settings" page as below, and click "OK" to finish the "Type Setting":





5) Using RGB interface as example(Dimming and CT are same)

? RGB control interface:



No.	Button	Function
1	DIY mode saving key	After DIY, click this key to save. Saving the DIY mode in anytime
2	ON/OFF	Turn on/off WIFI-V01
3	Color value	Display the R/G/B gray value, “L”: the current brightness level.
4	Color board	Select any static color mode from the board.
5	Brightness slip	Slip to adjust the current light brightness, 100 levels in total.
6	System setting	Click to system setting page, set the WIFI connection and select the application scene (Dimming, CT, RGB).
7	DIY memory function	Go to DIY modes select page. Display all of the DIY modes.
8	Dynamic modes	Go to select the dynamic modes.
9	Current application show	Display the current application scene.

? Dynamic modes control interface:



MODE:select the different dynamic mode, such as flash, fade and etc;
SPEED:select the speed level of the dynamic mode,100 levels in total;
EFFECT:select the different effect based on the different mode.

? DIY modes manage interface:






This page displays all of the DIY modes which have been saved, up to 12 modes in total.

This page displays all of the DIY modes which have been saved, up to 12 modes in total.

? System Setting interface:



System Settings:WI-FI connection Setting;
Product Attributes Settings:Type Setting (RGB/CT/DIM).

4.Controller operation illustration

1)Working state instruction

Indicator light </td